9 Ways to Fix Limited or No Network Connectivity Issues in Windows 10

In the digital era, a network connection is necessary for everyone, not just people working in the technology industry. Internet is a unit that is beneficial to students, teachers, technicians, software engineers, and even doctors. It has become our life and, in the pandemic, everyone was working from their respective homes.

The internet connection became all the more crucial. It is a hassle if you face connectivity issues or errors or suddenly your wifi stops working. If you belong to this criterion of people who often face such network-related problems, we bring you various methods to solve your problems regarding connectivity in windows 10.

Fix Limited or No Network Connectivity Issues in Windows 10

It is very easy to follow. You do need to take any outside help for this. You can easily fix it to do your work or binge-watch Netflix without any interference and have a good experience.

The connectivity and Network problems can arise in so many different ways. There is no hard and fast rule that because you did this, there is no internet on your system.

Some of the problems may arise because of the new update. Yes! Despite improving a lot of features and factors in the system, it is a known fact, and the update can introduce some unintended issues in your system. Updating a system is important because it not only improves your system but also helps boost the security system of your interface.

To solve all these network problems, you need to follow certain methods as there are various ways to tackle such issues by Microsoft itself. Some of them are listed as follows.


How To Fix Limited or No Network Connectivity Issues in Windows 10?

In a situation where after you update your system, you have difficulty connecting to the internet, or you cannot connect to the internet at all.

There are some easy procedures to follow that will help you to resolve it. Troubleshooting is the basic step to follow in such situations.

1. Reboot Your System

Shutting off and then restarting your system is the possible solution to almost all your PC or Laptop problems. Sometimes network issues can easily get resolve when people shut down their computer and then restart it again.

So, to restart your system, you need to follow three easy steps.

Step 1: The first step is to close all the tabs on your system. Then move your cursor on the taskbar and click to open ‘START.’ The start is the windows icon visible on the bottom left corner of your system.

Step 2: After opening ‘START,’ you will see a ‘POWER’ option. Move your cursor to tap on that.

Start menu

Step 3: After opening the power option, you will see a list of three options comprising ‘SLEEP,’ ‘SHUT DOWN,’ and ‘RESTART.’ Move your cursor to opt for ‘RESTART.’ 

After following all three steps, your system will restart. Once you are back on your home screen, open your web browser and see whether your network connection is back or not while loading your website. There might be a situation where the network icon at the bottom right corner of your screen shows an active connection, but the website still won’t open.

In such a situation, people should try to open a different website altogether as the problem is the website and not the connection. People can also check by opening different browsers as well. If this does not work at all, you can use command lines to check your network settings.


Suggested Reading: Top 10 Best Battery Cases For Your New iPhone 12

2. Fix Network Settings Using Command Lines

You can check your network connection by using the command lines and ensuring that the problem does not lie with something happening between the device for the network and your router. To make sure that your network configuration in Windows 10 is working, follow the steps mentioned below.

Step 1: Moves your cursor and click to open ‘START.’

Step 2: After opening, start the search for option ‘COMMAND PROMPT’ and tap the cursor on the result given for it so that you can open the screen.

Step 3: After you have opened the screen, type this command ‘ipconfig.’ This command will help you to search the IP address of your router and click ‘ENTER.’

Fix Network Settings Using Command Lines

Step 4: After going through step 3, you need to confirm ‘DEFAULT GATEWAY.’ After confirming this address, you need to see it is the same as your local router. Though there is one thing, you need to know that home networks generally use these two addresses, ‘ 192.169.1.1’ or ‘192.168.2.1‘. But depending on the service provider and your configuration, the address is different.

You can type these commands to determine the reachability of your router, i.e., whether it is reachable or not. ‘Ping ROUTER-IP’ commands help you test the connection from your router to your system having a 192.168.1.1 address. After completing your steps, if the ‘PACKETS’ field has four successful replies, it means that the connection of your router is working.

This is also an indication that the problem I not with the router, but it is somewhere between the internet service provider and your router or your internet service provider is having certain problems. At the same time, try connecting the network to other devices as well. If the connection is successful, there is a possibility that your system is having problems.


Suggested Reading: Best Bluetooth Wireless HeadPhones for iPhone 13 or 13 Pro

3. Enabling Your Wi-Fi Interface

If the problem persists and there is no network connection, you need to see that you have enabled your network connection. To check and enable the wifi settings, you need to follow the steps mentioned below.

Step 1: Move your cursor to the taskbar and search ‘SETTINGS.’ Click on the result, which will show you the list of options to make changes in your system.

Step 2: Go to the option titled ‘NETWORK & INTERNET’ and opt for it by clicking on the option.

NetWork Issues On The Windows

Step 3: After going to network and internet, you can see a toggle with the title of ‘WI-FI.’ Click on that to make it visible and to connect to the network.

There is also an alternate way for this. You can also tap on the option of ‘NOT CONNECTED,’ which is visible on the taskbar at the notification area by clicking on the wifi button. Also, if your system has a physical button for it does not forget to turn it on.


Suggested Reading: MiniTool Shadowmaker Review – Windows Backup Tool

4. Reconnecting Your Wi-Fi Connection

If you are facing issues with your laptops, there is a possibility that something is wrong with your wireless adapter or signal. This you can easily resolve by connecting, reconnecting, or disconnecting the network. You can do this by following these easy steps.

Step 1: Move your cursor to the taskbar and search ‘SETTINGS’ to open it. You click on the option.

Step 2: After opening your system’s settings, go to the option titled ‘NETWORK and INTERNET’ and opt for it by clicking on it.

Reconnecting Your Wi-Fi Connection

Step 3: On this option, you will find the toggle of ‘WI-FI’ enable that option and then disable it. Try this 2-3 times. Sometimes this helps as well to reconnect with the network. Though in a situation where people do not have a wireless section, or it is missing. Windows 10 can’t detect the network adapter. This means or results in a problem with your hardware device or problem with the driver.

Step 4: The next step is to move your cursor and go to the option of show available networks.

Step 5: After performing step 4, you will select the option of the wireless network from the long list of features.

Steps 6: Take your cursor to the ‘CONNECT’ button to connect with the internet.

You need to know that in recent times, every updated router allows the wireless connection. The routers use two frequencies they are 2.4GHz and 5GHz. These appear as different networks. 

If people see while resolving their connectivity use these two networks, you can try to connect with the different frequencies to check whether the network is back or not.

Step 7: After doing step 6, if the password option applies to you, confirm that if not, move to the ‘NEXT’ button.

After taking these 7 steps, you will resolve your problem and reconnect to the internet.


Suggested Reading: Best Apple TV Games To Play With Game Controller

5. Network Adapter

Often after an update, there are some inadvertent changes in the settings of your system. This happens without the knowledge of the user. One such example is updated disabling the adapter or making changes in the features like enabling airplane mode. This blocks your connection to the internet.

So, the network adapter must be present in the network set because if it is not, the driver creates some major problem in the network area. There is also a possibility that the adapter is disabled. To see whether it is the case r not and to enable your adapter, you have to follow the standard procedure in these easy steps.

Step 1: Move your cursor in the taskbar and search for ‘SETTINGS’ to open it. You have to click on the result.

Step 2: After opening, go to the option of ‘NETWORK & INTERNET’ and opt for it.

Step 3: You will see a list of options and features to choose from. Choose the option titled ‘STATUS.’

Step 4: After going to step 3, you can see under the option of ‘ADVANCED NETWORK SETTINGS’ the feature of the ‘CHANGE ADAPTER’ option.

CHANGE ADAPTER

Step 5: After moving your cursor to the change adapter option, click it and select to enable it.

After completing all the steps, your problem network gets resolve, and the adapter will configure on its own.


Suggested Reading: iBoysoft Drive Manager For Mac To Manage External Media Devices

6. Airplane Mode Disable

There is a possibility that you are facing a network issue because your airplane mode is on. You have to disable it if it is enabled, or your system will not connect to the internet connection. Sometimes after an update, it is enabled on its own. So to connect to the internet, you have to disable this feature. This is how you can disable it or turn it off.

Step 1: There is a white box on the taskbar of your screen, specifically at your lower right-hand corner. Tap on that white box to open it. It is also known as the Notification window.

Step 2: The box will be visible to you. If it appears blue, it means your airplane mode is on. Please tap on the box with the help of your cursor to turn it off. After turning it off, it will become black, indicating that your airplane mode is disabled.

There is an alternate option to disable your airplane mode, that is.

Step 1: Move your cursor to the taskbar to open ‘SETTINGS.’

Step 2: Go to the ‘NETWORK & INTERNET’ option and click on it.

Step 3: Go to the ‘AIRPLANE MODE.’

AIRPLANE MODE

Step 4: If it is visible to you that it is on, turn it off by clicking on the ‘AIRPLANE MODE’ toggle switch.

On the other hand, you can also restart your device/system.


Suggested Reading: Best Apple Watch Bands For Men To Wear It With Style

7. Recreating Your Wifi Profile

Sometimes there are situations where when you try to connect to the internet. It does not connect because there is some problem with the profile that you set up. The profile is made when you connect to the wireless network consisting of your username and password and other security features. It is advisable to check your wifi profile. After checking if there is some problem, you can rectify it or make a new one by following these steps.

Step 1: Go to ‘SETTINGS’ by moving your cursor to the taskbar and searching the word.

Step 2: Open the ‘NETWORK & INTERNET’ option.

Step 3: In the list of options, go for ‘WI-FI.’

Step 4: Under the wifi title, there is an option of ‘MANAGE KNOWN NETWORKS’ click to that.

MANAGE KNOWN NETWORKS

Step 5: You have to opt for a network having a problem.

Step 6: After performing step 5, i.e., after tapping on the network with the issue, you will have two options, ‘ PROPERTIES’ and ‘FORGET.’ Move your cursor to the option of forget and click on it.

Step 7: Move your cursor to the taskbar and click on the notification icon.

Step 8: From the options available to you, opt for ‘WIRELESS NETWORK’ having access to the internet.

Step 9: There will be a ‘CONNECT’ button visible to you. Click on that and confirm your key for network security and click on the ‘NEXT’ button.

Step 10: This step is entirely optional and is up to the discretion of the user. Go to the ‘YES’ option if you want your device to be discoverable to the network.

After completing the procedure, go to your web browser to confirm if you have regained your network or connection.


Suggested Reading: Best Cases and Accessories For Samsung Galaxy S21 Ultra

8. Restarting Home Router

If you feel that your system is not at fault here, you can try to reboot your router like this, on various occasions, fixes the connectivity issue with the internet. If you want to restart your router, you need to follow these steps.

Step 1: The first step will be to locate your home router.

Step 2: The next step will be to unplug your power cord.

Step 3: Then you have to wait for 1 minute approx.

Step 4: The last step will be to reconnect your power cord to the router.

After completing these four steps, wait for some time for your router to start and then check your network by opening your browser or by opening any website.


Suggested Reading: Best USB-C Docking Station To Buy For Apple iPad Pro

9. Fixing Connectivity with Network Trouble Shooter

Windows 10 comes with the troubleshooting feature, which will help you to resolve network-related issues conveniently. You can troubleshoot by following these steps.

Step 1- Move your cursor to open settings from the search option of your taskbar.

Step 2 โ€“ Go to the option titled ‘UPDATE & SECURITY’ and click on that.

Step 3- After clicking on update and security, you will find various options. In that option, choose the option of ‘TROUBLESHOOT.’

Step 4- Move your cursor to the option of ‘RECOMMENDED TROUBLESHOOTING’ and click the ‘ADDITIONAL TROUBLE SHOOT’ option.

Step 5- After step 4, you can see the option of the ‘GET UP AND RUNNING’ section. In that section, opt for ‘INTERNET CONNECTION TROUBLESHOOTER.’

Step 6- After this the click on the option of ‘RUN.’

Step 7- After running the troubleshoot, you have to choose between two options. You have to select ‘TROUBLESHOOT MY CONNECTION TO THE INTERNET.’

Step 8- After this window will guide you with its on-screen instruction, you have to follow them, and your problem will be resolved.

These are the ways that you can follow to resolve your issues regarding the internet connection easily. We hope this article about how to fix limited or no network connectivity issues in Windows 10 is helpful to you. Do share this content on social media if you found it useful for you in any manner. Please stay connected with us for future updates.

Full Disclosure:ย This post may contain affiliate links, meaning that if you click on one of the links and purchase an item, we may receive a commission (at no additional cost to you). We only hyperlink the products which we feel adds value to our audience. Financial compensation does not play a role for those products.

About Techkle Staff

Techkle Staff is a team of writers which writes for different category on the blog. They are the experts in their areas and share their views over Techkle.

Share via
Copy link